Prestige One

Your ears will tell you how right we are.

Introduction
The Qln Prestige One is a reference caliber monitor commensurate with the performance level of the award-winning Prestige series. In keeping with Qln’s truncated cabinet design, the Prestige One features the same minimal baffle area, time alignment, and dampening technology found in the Signature 3 with even greater optimization establishing a new performance benchmark.

Design details

Crossover
We utilize the same constant impedance crossover technology found in the rest of the Prestige series with fine tuning for the compact two-way design of the Prestige One. We have increased dynamics and even SPL by using lower loss coils to the woofer. All coils are air core, and all capacitors are of polypropylene material.

All coils are baked so the wires are glued together to reduce internal vibration.

The constant impedance crossover produces an even impedance response that eases the load an amplifier sees (especially tube amps) providing better phase coherence for the driver. The crossover is hard wired for best contact between components with as few contact points as possible. Every component is soft glued to increase damping and minimize vibrations.

 

Cable
We have designed our own internal wire for the Prestige series. Pure copper solid core wires wrapped side by side around a polypropylene core to reduce multi connections between each wire core.

Dual (+) and (-) cable parts are baked in a damped rubber like acoustic isolation body to reduce vibration and friction between each part. Isolation material are pure polypropylene without color material to avoid negative effect of color in the isolation material.

Speaker connectors
Top grade WBT Nextgen® connectors with minimal connection materials made of silver/copper are used to ensure the lowest distortion and signal loss possible. Normally we only using pure copper material. The reason for using silver plated connectors instead of pure copper is that while silver also oxidizes it provides a purer long term connection surface. And while the commonly used gold-plated surface is good for a non-oxidizing it is not best for sound quality.

 

Drivers
The bass/midrange and treble drivers have been specifically selected and custom developed by industry renowned Danish driver manufacturer Scan Speak offering the latest in 21st century advanced driver technology. The uniquely coated Kevlar bass/midrange driver with its built-in copper ring in the magnet system offers symmetric drive and higher midrange dynamics while also suppressing intermodulation distortion. The result is remarkable vocal reproduction and astonishing micro/macro dynamics from a compact 2-way speaker design. The unique Illuminator tweeter also offers excellent imaging at all listening positions. Its large roll surround and textile dome diaphragm provides a flat frequency response above 30 KHz with outstanding off-axis dispersion. The unique AirCirc magnet system and its rear chamber further reduce reflections and resonances.

Impedance: 8 ohms
Amplifier requirements: 25-250 Watt RMS
Tweeter: 25mm wide surround, AirCirc magnet, soft dome
Woofer: 177mm Kevlar® cone
Sensitivity: 87,5 dB SPL 1 Watt 1m
Low frequency performance: -3dB 42Hz
Cabinet: Qboard® Technology
Terminal: WBT Single wire
Dimensions (HxWxD): 390x265x372
Weight: 14,0 kg each
Finish: Walnut Piano, Walnut matte, White satin

Walnut Matte

 

 

Walnut Burl Piano